The buyer will not hold the seller responsible for the appropriate or inappropriate use of any device or devices on this website, either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of said device. The sale of devices listed here may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not purchase said item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item. Please Note: Medical equipment should be completely tested by a qualified biomedical technician prior to being put into service. Please note most medical equipment pieces need some maintenance and recertification. It is a normal and legal requirement. I strongly recommend that you get proper certification prior to use and get the unit completely checked out. Please Note: There may be devices on this website that can only be sold with a prescription or to a qualified health care provider. After your purchase please email or fax a copy of your prescription or current medical license if necessary. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.
Regardless of the origin of the equipment, photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyers responsibility to have this item professionally tested and certified by an authorized technician prior to use.
SHIPPING: NO SHIPPING at this time. In an effort to keep price low, LOCAL PICKUP ONLY. You may inquire about small item shipping and handling but this maybe cost-prohibitive. All items bought through PayPal are LOCAL PICKUP ONLY, unless prior S/H arrangements made.
PAYMENT: CASH on PICKUP, Credit Card (Visa/MC/AE/Discover) or PayPal ONLY. For PayPal payment; go to paypal.com, select "Send Someone Money" from the "Transfer" drop down menu along the top PayPal menu bar. Enter yours and my (synapsez51@yahoo.com) email addresses, amount, & hit continue. You must have a PayPal account, that can take 1-2 days to setup.
RETURNS: Sold As Is. No Returns. However, within 14 days of pickup, my examination of product (must be in exact condition as when sold), and the basis of your complaint, I may deem a full refund upon my discretion and return of item. These items are new, nearly new, or excellent condition and I stand behind that.
INQUIRIES: Please address inquiries, request for more pics, more information etc. to . I am the original owner/craftsman of all items on this site, I can answer any question. Email me for home address, you're welcome to view all items most anytime.
ATTENTION: There are two pages of items FOR SALE click numeral at top or bottom of pages to toggle between.
TO VIEW WEBSITE: Best to widen browser to see two pics abreast.
SEE PAGE 2 
[ (O.D.= L x W/Depth x H, inches) 84 x 13.5 x 74". Shelf openings, top down: 11.5, and 13" remainder. Vertical opening: 14.5 x 13.5 x 40" ]
This unit was made to act as a room divider; front, back, and 3 sides stained and satin polyurethane finished, as are all components listed here. The shelves are in fixed positions but the center supports are removable/reposition-able. Also, all the components on this page were made without "Toe Kicks" (the bottom face rail is not recessed). All drawers and doors have matching brass pulls. The vertical opening was designed for anatomical models. The back side of this unit was designed to attach the Shelf/Cabinet which is shown following this bookshelf, note last pic of this group. The left back outside corner (the vertical 74" height) is mitered, the other is not. There are no unfinished viewable surfaces (meaning undersides of shelving & inner cabinet surfaces stained & finished). A final note, the pics in this group of images appear to have been tinted green due to the background wall color, see other images for better color representation.
[ (O.D.= L x W/Depth x H, inches) 66 x 8 x 26". Top shelf opening 58 x 5.5 x 8.5", Two lower doored cabinets 22 x 5.5 x 15.5" ]
This unit was made to hang on the back of the Book Shelf/Room Divider, it could also be hung directly onto a wall. The cutout between the two doored sections measures 15.5 x 5.5 x 15.5". The oak doored cabinet is lockable with key (oak veneered door edges), the other has sliding plexiglass doors and is unlock-able (there is a simple locking devise available for these doors). There are no unfinished viewable surfaces. There is no backing to this unit.
[ (O.D.= L x W/Depth x H, inches) 24 x 13.5 x 74". Shelf openings, top down: 9.25, 11.5, 11.5, 8.5, 8.5, and 14.75". Both 11.5" openings have unlock-able dual sliding plexiglass doors. ]
This unit originally designed as an exam room instrument case and matches the Book Shelf/Room Divider. Neither of the back two (vertical 74" height) outside corners were mitered. There are no unfinished viewable surfaces.
[ (O.D.= L x W/Depth x H, inches) 33.5 x 20 x 41". Cabinet dimensions excluding the counter top overhang are: 30.75 x 15.25 x 41". Overall cabinet opening of 29 x 15.25 x 30" has one non-removable, non-adjustable shelf, dividing opening into a top opening of 11" ht. and a bottom opening of 17" ht. ]
The bottom 17" opening can be further divided by a removable and adjustable shelf, note pics below. Two drawers are mounted on roller slides with 11.5 x 4" openings and measure 14" in depth/length. The right back outside corner was mitered, the other back outside corner was not, note last pic of this group. Both drawer faces are 3/4 solid oak. The cabinet doors have oak veneered edges. There are no unfinished viewable surfaces, except for the drawer sides and bottom.
[ Length of backside= 71.75". Left side depth= 30", 30" depth length is 17". Right side depth= 19", 19" depth length is 36". This is 1/2" plywood, not oak veneered. ]
There is a 1" dia. electrical cord hole near the right back corner. The face is solid 3/4" oak and is 2.25" in width. There is a moving/transport blemish (hairline 1.5" crack in plywood) on the front 30" edge angled area, not viewable in pics, does not effect strength.
Showing just a few possible arrangements of the furniture components.
Upholstered in designer RhinoHyde "Dusty Jade" this table is in like new condition.There is a surface mark from shipping located on the center of main table adjacent to the tilt headpiece as seen in bottom photo, hard to see and no effect to integrity of upholstery. Table comes with original product descriptions and partial box of headrest squares (with face slot) and table mounted headrest roll paper holder. Measures approximately 72x 24x 22" (l x W x Ht).
Please note "Pelvic Sacral Blocks", my English setter's dental bite seems to match the pattern on one of the blocks although he claims he knows nothing about it. These blocks are free to the buyer of the ErgoBench. Made of a very dense foam.
This bench is excellent as a ultrasound/electrotherapy table. It is heavy duty, stable and can be transported in 2 pieces with fold-up legs. It measures approximately 72x 25.75x 25.5" (l x W x Ht). Disassembled, the front section weighs ~55 lbs and the 2nd section ~ 43 lbs. The grey upholstery has no surface marks or signs of wear, comes with partial box of headrest squares (with face slot).
Both Mettler units complete in original packing, all additional accessories shown (except rulers), all original brochures and package inserts included. Estimated ~5 hour maximum use on 716 and 2 hour use on 206 unit. Both units like new, no cosmetic blemishes. Note: The muscle stim comes with all you see (as well as the ultra sound), too many extras to list and describe, please don't ask for specifics on these extras. Also note: the white balance was not uniform on the camera pics of the units, the units are the whitest color as seen in the pics and both units color are exact.
This is Model M73-625A, the Jeanie Rub Variable Speed Massager,"Master Massager". Price includes the Faux Sheepskin Pad cover, original Owners Manual and package inserts. The unit has a maximum of ~2-3 hours use, although it has cosmetic marks due to lack of shipping packing during two clinic relocations it is in excellent shape.
The benchmark against which all other heating units are judged. The E-1 fits on a desktop, counter top, or mobile stand. Made from high quality stainless steel, durable, almost indefinite life. Thermostatically controlled temperature and no plumbing required. It holds 4 standard size hot packs or 1 Neck Contour and 3 Standard hot packs. Includes original packaging, owners manual, stainless steel pack rack and neck contour insert. No Steam Packs included, see Chattanooga Hydrocollator Packs. Approximate, 500 hours use.
A popular cervical traction devise. The variable water filled bag provides the weight. Includes adjustable head harness and hardware for wall mount. New item, set-up but never used clinically.
All "Supports" and "Heel Lifts" are NEW, never been used. A selection of JaCo support products: Universal 4" Cervical Collar # 2124, 6" Sacro Support (26 to 36") #615, and a two pull L/S Support XL (34 to 38") #394. These orthopedic supports retail ~$41.00, for more information see : JaCo Distributers. Enter JaCo product code numerals only into SEARCH. Also, a large selection of Rubber Heel Lifts as offered through ScripHessco, use OPTION pull down menu to see sizing. Heel Lifts include: (Quantities in brackets if >1) LS3, LS5, LS7, LS9(3), LL3(2), LL5(2), LL7(2), MS9, ML3(3), ML5(3), ML7, ML9(2), these retail for ~$70.00.
Custom made plywood sides, paneled back and redwood face trim & divider, each panel measures 16 x 35.75", the unit measures ~ 7" in depth. 4-bulb, 4 electronic quick start ballasts, switched on bottom left side, made for wall mount. Unit does not have a top edge film holding device, films do slide under plexiglass retaining clips (on vertical sides). I used Medical Paper Tape to attach top of films to plex, reusable, convenient, simple. See paper tape Here. I will include a roll with view box.
This is a Halsey Medical Product, it is part (1/3) of an original single 3 panel unit. The welds on the original unit were ground off to split it into 3 separate single panel units, hence the multiple holes on one side. I bought one of these 3 panels for $50.00. Made of metal and measures ~5.5" in depth. Very nice, great size, keep it on your desk.
This is a comprehensive collection of "Like New" Medical Charts, I will also include the Laminated Skeletal System wall chart (Very Good condition, but not pictured here). I have the Laminated Muscular System Anatomical Chart also (not pictured here), it has discolored for some reason (the Skeletal Sys. did not) will include if wanted.
SEE PAGE 2